|
Product Categories
Juicers, Wheatgrass - Manual Poly Juicers Juicers, Wheatgrass - Manual Metal Juicers Juicers, Wheatgrass - Electric Juicers Seed Sprouters Dehydrators Grain Mills - Manual Grain Mills - Electric, Australia & Export Commercial Electric Grain Mill Breathing/Bloodpressure - Resperate Zen Chi Foot Massager Coconut Scrapers Nutcrackers Water Ionizers - MicroLite/Melody Nutritional - Antioxidants Himalayan Goji Juice Oralmat Drops - for airway conditions Survival, outdoor and camping equipment Hulda Clark - Anti-parasite herbs Meters for measuring - Water quality Lymphacisers, (trampolines) RH48 Books - Juicing, fasting, wheatgrass Water Distillers - electrical types Vacuum packing - food storage Trifield Meters - EMR Meters Prostate Maintenance Himalayan Rock Salt Lamps
|
Current Category
Meters for measuring - Water quality
The Quality of water can be tested by the following meters, to find Conductivity, (parts per million TDS), PH (acid/alkaline) and ORP. (indicates presence of antioxidants)
|
Smart SM100 PH meter

This unit comes with probes to test your water for acid/alkaline values, (but also can be used for most liquids), and also a 20ml satchet of calibration solution. Or if the unit is to be used often, purchase an extra container ( 185 ml ) of the solution for $7.50 As an example, if the unit is used daily, clean and recalibrate the unit (couple of minutes only) each week, you will then continue to get accurate readings.
Range: 0.0 - 14.0 pH Resolution: 0.1 pH Accuracy: + or - 0.2 pH Calibration: Manual 2 point Battery: 9 Volt battery Life: 300 Hours Environment: 0 - 50 degrees C/95% RH Max. Dimensions: 80x145x35mm
|
|
Price:
|
|
|
Smart SM500 ORP meter

This unit could well be the most important of meters, as it measures antioxidant activity in the liquid. Increased presence of negatively charged hydrogen ions in any liquid for consumption, makes it beneficial to health and well being, see Microhydrin under nutritional formulations.In the absence of an adequate supply of these, intracellular function, communication and energy production are inhibited, toxins and free radicals accumulate and health deteriates. Tap water has minimal quantity, while fresh juices and real spring water, would have an abundance. Adding spirulina powder to tap water makes it an antioxidant. Comes with platinum electrode and 9 volt battery and is pre-calibrated, requiring only cleansing solution for electrodes included.
Range: + or - 1000 mV Resolution: 1 mV Accuracy: + or - 5 mV Battery: 9 volt, 300 hours of use. Environment: 0 - 50 degrees C/95% RH Max Dimensions: 80x145x35mm
This unit can also be used to measure Chlorine levels in water, as it measures increased oxidising activity when chlorine is added, this gives a higher reading on the scale, while the water increases it's ability to kill microorganisms.. A primary advantage of this is that it provides the operator with a rapid and single valued assessment of the sanitising activity in the water. Studies have shown that an ORP value of 650 mv or greater indicates that there is enough oxidising activity to kill most bacteria and viruses in seconds.
|
|
Price:
|
|
|
Smart EC Conductivity Meter SM-301

Measures parts per million of total dissolved solids, but in microS/cm, as would occur in tap water which has many dissolved solids, due to additives etc.
SM 301 Standard Meter
Range: 10 - 1990 uS/cm (or more sensitive model SM-302, 0 - 10.0 mS/cm for specialised applications, same price) Resolution: 10 uS/cm (Model SM-302 has resolution of 0.1 mS/cm) Accuracy: + or - 2% full scale Calibration: manual 1 point Battery life: 1x 9 V battery / 300 hours Environment: 0 - 50 degrees C / 95% RH Max Dimensions: 80x145x35mm
Electrode cleaning solution included 15ml, or purchase extra 185ml for $7.50, max 6 month shelf life, order manually
As an alternative to the above meter, which shows readings in microS/cm, the more accurate calibration type, we also have available meters that read in parts per million, the standard US measuring system, with a slightly more coarse calibration. (PPM)
SM-401: For lower readings on the scale, from 10 - 1990 PPM, being more accurate for the lower range.
SM-402 For all readings over the whole scale, up to 10,000 PPM , more suited to bore water & hydroponics, calibrated in g/l range: 0 - 10 g/l (1 g/l = 1000 PPM)
To purchase one of these models, simply select the standard model (same price) and put under special instructions, the model number you require.
|
|
Price:
|
|
|
Professional ORP, Temp & pH Meter
PROFESSIONAL PORTABLE METERS The very best of our meters for the more professional industrial/commercial use

Extended range pH/ORP/Temperature meter SM 106 - Measure pH, ORP and Temperature with one single electrode - With Stability Indicator and Hold Feature
Specifications:
| Range |
-2.00 - 16.00 pH -2000 - +2000 mV -5.0 - 80.0°C 23.0 - 176.0°F |

|
| Resolution |
0.01 pH 1 mV 0.1°C 0.1°F |
| Accuracy |
± 0.02 pH ± 2 mV ± 0.5°C to 60.0°C; ± 1°C outside ± 1 up to 140.0°F; ± 2°F outside |
| Typical EMC Deviation |
± 0.02 pH ± 2 mV ± 0.2°C |
| Temperature Compensation |
Automatic from -5 to 80°C/23 to 176°F |
| Calibration |
Automatic in 1 or 2 points |
| Probe |
Amplified pH/ORP/°C probe MA923D/1 |
| Environment |
from 0 to 50°C/from 32 to 122°F; R.H. 100% Max |
| Battery/Life |
1 x 9V/500 hours of continuous use |
| Auto-off |
after 8 minutes of non use |
| Dimensions |
200 x 85 x 50 mm |
| Weight |
260 g (with battery) |
|
|
Price:
|
|
Secure ecommerce shopping cart software and credit card processing provided by ezimerchant
|